Multi-Cal Pressure Calibrator Series MC
Multi-Cal Pressure Calibrator Series MC

erchangeable Ranges, ± 0.05% Accuracy, Datalogging Capability, NIST Traceable

Multi-Cal Pressure Calibrator
Interchangeable Ranges, ± 0.05% Accuracy, Datalogging Capability, NIST Traceable

Series MC Portable Multi-Cal Pressure Calibrator performs a wide variety of simple and complex pressure based measurement, test, and calibration operations. Modular sensor design allows user to select pressure measurement range for application flexibility. Calibrator can accommodate up to two interchangeable pressure modules (sold separately below) in any combination of range or accuracy.

Simultaneously display two separate measurements on the two line, alphanumeric display. Readings can be displayed in a choice of seven preprogrammed engineering units or any single user-defined unit. Calibrator features min/max recall, hi/lo alarm, percentage of full scale pressure readings, mA/voltage measurement, leak rate and pressure decay measurement, switch testing capabilities, including trip point and dead band, and velocity/volume flow rates.

Quickly document calibration procedures using the data logging feature which stores up to 384 sets of pressure and time/date stamped measurements. Easily upload stored data to an IBM compatible computer via the RS232 port. Calibrators and modules include certification to NIST traceability - ideal as a secondary standard for calibrating pressure equipment.

Multi-Cal Pressure Calibrator includes utility software, test leads, protection module, adjustable had strap, AC adapter, two 9V batteries, instruction manual, and hard carrying case.

Model Number MC2K Handheld Calibrator
Model Number CP40 Serial Printer

Multi-Cal Pressure Modules are interchangeable and available in a wide selection of pressure ranges and accuracies. Handheld calibrator accepts up to two pressure modules. Modules include NIST calibration certification.


Model Number Range
MC1000 0.25" H2O Differential Pressure, ± 0.07
MC1001 0.50" H2O Differential Pressure, ± 0.07
MC1004 5.00" H2O Differential Pressure, ± 0.06
MC1006 25" H2O Differential Pressure, ± 0.06
MC2010 5.0 psig Gauge Pressure, ± 0.05
MC2012 15.0 psig Gauge Pressure, ± 0.05
MC2016 100.0 psig Gauge Pressure, ± 0.05

 Items subject to Schedule B discount

OPTIONS- Consult factory for other pressure ranges and accuracies. FM approved models are also available.

Accuracy: Differential Pressure Modules: ±0.06% FS, Gauge Pressure Modules: ±0.05% FS, Voltage Input: ±0.025% FS @ 1/10 VDC, ±0.10% FS @ 0/30 VDC, Current Input: ±0.03% FS @ 1/20 mA, ±0.05% FS @ 0/50 mA
Repeatability: Ranges ≤0/2 psi: ±0.05% of span, Ranges ≥0/5 psid: ±0.02% of span
Sensitivity: ±0.002%of span with dampening 1 part in 50,000 (max.)
Overpressure: Differential Pressure Modules: 50 psi positive direction, 15 psi negative direction, Gauge Pressure Modules: 2x range (0/5 psi to 0/1000 psi
Media: Clean, dry, nonconductive, noncorrosive gases
Output: RS232 serial interface, 9-pin
Baud Rate: 300, 1200, 2400, or 9600, selectable
Alarm Output: SPST form C 110 VDC, 120 VDC (max.), 1 A (mas.), 30 W, 62.5 VA (resistive)
Dampening: (Measurement averaging) programmable from 0 to 16 consecutive readings
Temperature Compensation: 20 to 120°F (-7 to 49°C)
Temperature Error: Maximum of ±0.004% of span per °F over compensated range for zero and span
Temperature Effect Electrical Measurement: ±0.001% of span per °F over compensated range
Ambient Operation Temperature: 32 to 120°F (0 to 49°C)
Storage Temperature: -4 to 158°F (-20 to 70°C
Power Supply: Internal: two 9 VDC alkaline batteries,External: AC adapter 9 VDC, 500 mA
Battery Life: 30 hours (approximate)
Engineering Units: inH2O, psi, inHg, kpa, mbar, cmH2O, mhG, and user-defined
Display: Alphanumeric LCD, 0.37" (9.5 mm) height per line, 2 lines, 16 characters/line
Display Update: 100 msec.
Process Connection: 1/8" NPT(F)
Electrical Connections: Miniature recessed banana jacks
Housing: ABS plastic
Weight: Calibrator: 2.2 lbs. (1.3 kg), Pressure Module: 0.5 lb. (0.3 kg)

Pressure measurement for clean room control, filter performance monitoring, HVAC testing and setup, draft measurement, airflow measurement control, differential pressure measurement in laminar flowhoods, point booths, industrial ovens and fume hoods. Use as a secondary standard for